Float Pontoon Supplier Introduces How To Identify The Pros And Cons Of Floats


To identify the quality of the pontoon, it is generally […]

To identify the quality of the pontoon, it is generally necessary to use professional testing tools and methods to carry out the corresponding anti-aging, bearing capacity, falling weight impact, high-temperature freezing, high pressure, side ear tension, bending, and other tests to test the various technologies of the product index. Only when all the indicators meet the specified requirements, it is a qualified product. Below, Float Pontoon Supplier introduces specific methods to identify the quality of floats:


1. Weight: A single weight of a pontoon produced by a regular manufacturer is generally 7 kg ± 0.3 kg; while some small workshop-style manufacturers often cut corners to produce, and the actual weight does not reach this standard. As the saying goes, the slightest difference is a thousand miles away. The weight is not up to the standard, indicating that the wall thickness of the pontoon is insufficient, such products are easy to wear, crack, leak, not to mention the light-bearing capacity, and the balance is also poor.


2. Appearance: Color is an important aspect of appearance. A good product has uniform color distribution, full and slightly convex shape, giving people a natural and harmonious feeling; if the color is uneven, dark, and light, the shape is dull, rough, and fuzzy, It means that the manufacturer chooses inferior raw materials and the level of technology is poor. Such inferior products are not beautiful in a single vision, and the effect of assembly is even worse.


3. Hardness: Hit the pontoon with a heavy hammer to detect the hardness (including curvature) of the product. High-quality pontoons are thick and hard, yet flexible, strong, and resistant to blows. Inferior buoys are thin, soft, and brittle, and crack when they are twisted. The quality of the product is defective and does not comply with national regulations at all.


4. Clearance tightness: a platform assembled with a good pontoon has a tight connection between the cylinder body and the cylinder body, and there is basically no gap, and a coin can not fall; a platform with a poor pontoon assembly has a large gap and cannot be clamped. Coins, even though the gaps, you can see the surface of the water. Large gaps in the platform pose a major safety hazard. An obvious fact is that lesbians wearing high heels are particularly prone to fall over, and naughty children can easily pinch their fingers and cause personal injury.

Views: 110